manualshive.com logo in svg

Bosch DINION IP 5000 MP, Руководство пользователя программного обеспечения, Страница: 24 / 112

Поделиться
Скачать
Bosch DINION IP 5000 MP Скачать руководство пользователя страница 24

–

live is the lowest authorization level. At this level you can
only view the live video image and switch between the
different live image displays.

Define and change a separate password for each level. Enter the
password (19 characters maximum; no special characters) for
the selected level.
Re-enter the new password to ensure that there are no typing
mistakes.

Date/Time

If there are multiple devices operating in the system or network,
it is important to synchronize their internal clocks. For example,
it is only possible to identify and correctly evaluate simultaneous
recordings when all devices are operating on the same time.
Device time, date and time zone are shown.

4

Click Sync to PC to apply the system time from your
computer to the device.

Note:
It is important that the date/time is correct for recording. An
incorrect date/time setting could prevent correct recording.
 
The unit can receive the time signal from a time server using
various time server protocols and then use it to set the internal
clock. The device polls the time signal automatically once every
minute.
Enter the IP address of a time server.
Select the protocol that is supported by the selected time
server. It is recommended to select the SNTP server protocol.
This protocol provides high accuracy and is required for special
applications and future function extensions.
Select Time server if the server uses the RFC 868 protocol.

4.2

24

en | Basic Mode

Camera Browser

Interface

2015.04 | v1.592 | AM18-Q0678

Bosch Security Systems

Содержание DINION IP 5000 MP

















































































































Отзывы:

Нет отзывов