34
en | Configuration
FLEXIDOME IP 3000i IR | FLEXIDOME IP micro
3000i | DINION IP 3000i IR | FLEXIDOME IP turret
3000i IR
2020-01 | V02 | DOC
User manual
Bosch Security Systems B.V.
4.4.2
Recording Profiles
A recording profile contains the characteristics of the tracks that are used for recording. These
characteristics can be defined for ten different profiles. The profiles can then be assigned to
days or times of day on the
Recording Scheduler
page.
Each profile is color-coded. The names of the profiles can be changed on the
Recording
Scheduler
page.
To configure a profile click its tab to open its settings page.
–
To copy the currently visible settings to other profiles, click
Copy Settings
. A window
opens to select the target profiles for the copied settings.
–
If you change a profile’s settings, click
Set
to save.
–
If necessary, click
Default
to return all settings to their factory defaults.
Stream profile settings
Select the encoder profile setting that is to be used with stream 1 and 2 when recording. This
selection is independent of the selection for live stream transmission. (The properties of the
encoder profiles are defined on the
Encoder Profile
page.)
Select the ROI pre-position scene that is to be used for recording. (The ROI pre-positions for
stream 2 are configured on the
Live
page.)
Settings for selected recordings
Recording includes
Select what is to be included in the recordings:
–
Audio
: If audio is not enabled,
Off
is shown. Click on
Off
and the page is redirected to
the
Audio
section.
–
Metadata
.
Standard recording
Select the mode for standard recordings:
–
Continuous
: the recording proceeds continuously. If the maximum recording capacity is
reached, older recordings are overwritten automatically.
–
Pre-alarm
: recording takes place in the pre-alarm time, during the alarm and during the
post-alarm time only.
–
Off
: no automatic recording takes place.
Stream
Select the stream to be used for standard recordings:
–
Stream 1
–
Stream 2
–
I-frames only
Alarm recording
Select a period for the
Pre-alarm time
from the list box.
Select a period for the
Post-alarm time
from the list box.
Alarm stream
Select the stream to be used for alarm recordings:
–
Stream 1
–
Stream 2
–
I-frames only
Check the
encoding interval and bit rates from profile:
box and select an encoder profile to
set the associated encoding interval for alarm recording.
