background image

7

Removing and installing the filter

The filter must be serviced regularly in order to guarantee 

efficient filtration of odours and grease.

Metal grease filter

The metal grease filters must be cleaned every 100 operating 

hours or at least every two months.

Risk of fire!

Grease deposits in the grease filter may catch fire.

Clean the grease filter at least every 2 months. 

Never operate the appliance without the grease filter.

Removing metal grease filter

The metal grease filters filter the grease out of kitchen steam. 

To keep them in good working order, the filters should be 

cleaned at least every two months.

1.

Hold the filter pull-out by the middle and pull it out.

2.

Open the lock on the metal grease filters and remove the 

filters from the retainer.

Note: 

Fat may accumulate in the bottom of the metal grease 

filter. Hold the filters level to prevent fat from dripping out.

3.

Clean the metal grease filters and filter cover.

4.

Clean the appliance from the inside.

Cleaning the metal mesh grease filters
Notes

Do not use any aggressive, acidic or alkaline cleaning 

agents.

When cleaning the metal mesh grease filters, also clean the 

holder for the metal mesh grease filters in the appliance 

using a damp cloth.

The metal mesh grease filters can be cleaned in the 

dishwasher or by hand.

By hand:
Note: 

You can use a special grease solvent for stubborn dirt. It 

can be ordered via the Online Shop.

Soak the metal mesh grease filters in a hot soapy solution. 

Clean the filters with a brush and then rinse them thoroughly.

Leave the metal mesh grease filters to drain.

In the dishwasher:
Note: 

If the metal mesh grease filters are cleaned in the 

dishwasher, slight discolouration may occur. This has no effect 

on the function of the metal mesh grease filters.

Do not clean heavily soiled metal mesh grease filters together 

with utensils.

Place the metal mesh grease filters loosely in the dishwasher. 

The metal mesh grease filters must not be wedged in.

Installing the metal mesh grease filter

1.

Insert metal grease filter.

2.

Fold up metal grease filter and engage the lock.

Note: 

Ensure that the filter cover lock engages correctly.

Replacing bulbs

Risk of electric shock!

When changing the bulbs, the bulb socket contacts are live. 
Before changing the bulb, unplug the appliance from the mains 
or switch off the circuit breaker in the fuse box.

Risk of burns!

Halogen bulbs become very hot when switched on. There is still 
a risk of burning for some time after they have been switched 
off. Allow the halogen bulbs to cool down before replacing 
them.

Important 

Only use a bulb of the same type and same power 

(see also the bulb holder or rating plate).

Replacing halogen bulbs
Note: 

When inserting halogen bulbs, do not touch the glass 

bulb. Use a clean cloth to insert the halogen bulbs.

1.

Carefully remove the bulb ring using a suitable tool.

2.

Remove the bulb and replace it with a bulb of the same type.

3.

Insert bulb cover.

4.

Insert the mains plug or switch on the fuse again.

Replace the bulb with one of the same type:

Voltage:

 12 V

Power:

 max. 20 W

Socket: 

G4

Area

Cleaning agent

Stainless steel

Hot soapy water: 

Clean with a dish cloth and then dry 

with a soft cloth.
Clean stainless steel surfaces in the 

grind direction only.
Special stainless steel cleaning prod-

ucts are available from our after-sales 

service or from specialist retailers. 

Apply a very thin layer of the cleaning 

product with a soft cloth.

Painted surfaces

Hot soapy water: 

Clean using a damp dish cloth and dry 

with a soft cloth/towel.
Do not use any stainless steel cleaners.

Aluminium and plas-

tic

Glass cleaner: 

Clean with a soft cloth.

Glass

Glass cleaner: 

Clean with a soft cloth. Do not use a 

glass scraper.

Controls

Hot soapy water: 

Clean using a damp dish cloth and dry 

with a soft cloth/towel.
Risk of electric shock caused by pene-

trating moisture.
Risk of damage to the electronics from 

penetrating moisture. Never clean 

operating controls with a wet cloth.
Do not use any stainless steel cleaners.

+6*&8%*

Содержание DFO060W50













Отзывы: