DCN-D Conference Delegate Units
Configuration | en
19
Bosch Security Systems B.V.
Installation and Operation manual
F.01U.265.631 | V1.0 | 2012.03
1.
Disconnect the delegate unit from the DCN system.
2.
Change the mode of the delegate unit (refer to
Table 7.3
).
3.
Change the button, if required refer to
Section 5 Installation
.
4.
Re-connect the delegate unit to the DCN system.
5.
If required, (de-)initialize the delegate unit (refer to
Section 7.1 Initialization
).
7.4.1
Single delegate
Default, the delegate unit comes in the single delegate mode and has the default microphone
button installed. Refer to
Table 7.3
.
Figure 7.4
Default microphone button
7.4.2
Chairman
When the delegate unit is in the chairman mode, it is a chairman device for 1 chairman (refer
to
Table 7.3
). You can put all types of delegate units in the chairman mode. When you put the
delegate unit in the chairman mode, you also have to install the DCN-DBCM buttons (to be
ordered separately). Refer also to
Section 5 Installation
.
Figure 7.5
DCN-DBCM microphone buttons
The functional difference between a delegate unit and a chairman unit is the priority button
on the left hand side of the microphone button. With the priority button, the chairman can
disable the microphones of all delegate units used in the DCN system. At the same time, the
priority button enables the microphone of the chairman.
The delegate unit in chairman mode has the possibility to:
–
Play an attention chime when the chairman pushes the priority button.
–
Erase the request-to-speak list and the speakers list when the chairman pushes the
priority button.
NOTICE!
The DCN-DBCM button set comes with a tool that you can use to remove the buttons from the
delegate unit. Refer to
Section 5 Installation
.
Содержание DCN-DCS
Страница 1: ...DCN D Conference Delegate Units DCN DS L DCN DCS DCN DV DCN DVCS en Installation and Operation manual ...
Страница 2: ......
Страница 25: ......
