2019.08
F.01U.036.306-04
Installation Instructions
D55
© 2019 Bosch Security Systems B..V.
Torenallee 49, 5617 BA Eindhoven, Netherlands
C ustomer Service : (800 ) 538-580 7; Technical Support (888 ) 886-6 189
Page 2 of 2
11.
Make any adjustments necessary for the command
center's operation
(e.g., jumper selections, slide switch
positions, programming, etc.). See the instructions provided with the unit.
12.
Align the two top cover tabs with the top tab slots on the command center base. Slide the top of the cover into
the base and gently push the bottom of the cover until it snaps into place.
13.
Push each key on the keypad towards the top of the cover to ensure proper mating with the openings in the
top cover.
14.
Plug the modular connector on the wiring cable into a modular jack wired for connection of the command
center.
Figure 1: Mounting the Command Center
Top Cover Tabs (2)
Bottom Cover Tabs (2)
6 x 3/4 in. screws (1)
6 x 1/2 in. screws (2)
Mounting Hole (1)
Top Tab Slots (2)
Mounting Holes (2)
Bottom Tab Slots (2)
Wiring Connector
Wiring Cable
Tie Wrap
Bump-On Feet (4)
Mounting Holes (3)
D55 Desk Stand
Modular Jack
