manualshive.com logo in svg

Bosch D220, Руководство пользователя

Поделиться
Скачать
Bosch D220 Скачать руководство пользователя страница 28

28

Change Other Users’ Passcodes

I have this feature.

I do not have this feature.

This feature allows those with Owner type passcodes to change the
passcodes of system users.

1.

Press key [6] to enter Show User Mode.

2.

Enter your passcode. (Owner type required.)

3.

Press [0].

The 

Part 

light begins flashing. You are now in Owner Passcode

Change Mode.

4.

Enter the number of the passcode you want to change (1
through 8).

5.

Enter a new passcode 

with the same number of digits as your

passcode

.

The OK tone sounds.

If the error tone sounds, go to step 4. Try a different passcode.

6.

Enter the new passcode again.

The OK tone sounds. Go to step 4 to change another passcode or
step 7 to continue.

If the error tone sounds, return to step 4. Be sure to enter the
same passcode in steps 5 and 6.

7.

After changing a passcode you should check its user type.

Press [Clear]

 

once to go back to Show User mode.

8.

Press [Clear]

 

a second time to exit the Passcode Change mode.

Содержание D220





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды