background image

Explanation of symbols and safety instructions

59

Climate Room Control – 6721841498 (2022/04)

1

Explanation of symbols and safety 
instructions

1.1

Explanation of symbols

Warnings

In warnings, signal words at the beginning of a warning are used 
to indicate the type and seriousness of the ensuing risk if 
measures for minimizing danger are not taken.

The following signal words are defined and can be used in this 
document:

DANGER

DANGER

 indicates that severe or life-threatening personal 

injury will occur.

WARNING

WARNING

 indicates that severe to life-threatening personal 

injury may occur.

CAUTION

CAUTION

 indicates that minor to medium personal injury may 

occur.

NOTICE

NOTICE

 indicates that material damage may occur.

Important information

The info symbol indicates important information where there is 
no risk to people or property.

1.2

General safety instructions

H

Notices for the target group

All system-relevant instructions must be 
observed. Failure to comply with 
instructions may result in material 
damage and personal injury, including 
danger to life.

▶ Installation, inspections, repairs, 

modification and relocation must be 
done by a qualified installer or service 
company.

▶ Before carrying out the installation, 

read the installation instructions of all 
system elements.

▶ Observe the safety instructions and 

warnings.

▶ Follow national and regional 

regulations, technical regulations and 
guidelines.

▶ Record all work carried out.

H

Intended use

▶ Use the product only to control air 

conditioning split units.

All other use is considered unsuitable. 
Any damage resulting from prohibited 
operations is excluded from liability.

H

Safety of electrical devices for 
domestic use and similar 
purposes

The following requirements apply in 
accordance with EN 60335-1 in order to 
prevent hazards from occurring when 
using electrical appliances:
“This appliance can be used by children 
of 8 years and older, as well as by people 
with reduced physical, sensory or 
mental capabilities or lacking in 
experience and knowledge, if they are 
supervised and have been given 
instruction in the safe use of the 
appliance and understand the resulting 

Содержание CRC R-1

















Отзывы: