Bosch Compress 3000 DW FI Series, Инструкция по установке и эксплуатации

Страница: 18 / 32

6 720 809 134 (2013/09) Compress 3000 DW FII
18 | Operation
Fig. 14 Display
[1] Electrical heating mode
[2] DHW heating by heat pump
[3] External heating (solar or boiler)
[4] Information
[5] Input of adjustable parameters
[6] Error display
[7] Service menu selection
[8] Days of the week
[9] "Auto/Man" operation
[10] ON/OFF indicator
[11] "Prog" menu selection
[12] Setting the hour
[13] Runtime
[14] Power consumption
[15] Code for cylinder temperature sensors
[16] Frost protection
8.1 Operation modes
" " symbol is displayed
Operating times as set (P1, P2 or P3).
" " symbol is displayed
Continuous operation (24 h/7 days) without time setting or in
"Full" operating mode.
8.2 Setting the domestic hot water temperature
▶ Press the "+" or "-" button to set the desired value.
Fig. 15 Setting the temperature
▶ Press the "OK" button to confirm the setting.
8.3 Main menu
Calling up the main menu
▶ Press and hold the "Menu" button for max. 3 seconds.
Fig. 16 Calling up the main menu
Once you have called up the main menu, you can select the
following menus/submenus:
•
Prog - Operating modes
– Manual
– P1
– P2
– P3
– Full
– Off
• Mode - Heat types
– "Electrical" operating mode
– "Heat pump" mode
– "Combi" operating mode
• Set - Settings
The water temperature is set to 50 °C at the
factory.
2 3 4
5
6
8
9
12
11
16
14
13
6720645393-10.1V
1 7
15
10
The set value flashes until the setting is
confirmed.
If the setting is not confirmed within
10 seconds, the previously set value is
retained.
Once the temperature has been set, the
display indicates the water temperature in
the cylinder.
6720646160-13.1V
6720646160-14.1V
menu
-
ok
+
< 3 s