
18
| en
7 620 210 013 | 10.2009
Robert Bosch Car Multimedia GmbH
Source selection
Source selection
Selecting radio playback (RADIO)
To select radio playback for the cabin area,
press the
RADIO
button
3
.
"RADIO" appears on the display.
The desired radio station is adjusted at the
connected CRD radio device.
Selecting CD playback (CD)
To select CD playback for the cabin area,
press the
CD
button
4
.
"CD" appears on the display.
The control of the CD playback (track selec-
tion, directory selection in MP3/WMA mode
and functions such as MIX, SCAN or REPEAT) is
carried out at the connected CRD radio device.
Selecting CD changer playback
(CDC)
To select CD changer playback for the cabin
area,
press the
CDC
button
5
.
"CHANGER" appears on the display.
The control of the CD changer playback (track
selection, CD selection and functions such as
MIX, SCAN or
REPEAT) is carried out at the connected CRD
radio device.
Note:
If an iPod is connected at the CRD
radio device instead of a CD changer,
this device is selected as audio
source by pressing the
CDC
button
5
.
Ñ
Ñ
Ñ
Selecting the video playback
(VIDEO)
Video sources can be video players, DVD
players and TV tuners. Two video sources can
be connected to the device via a separate
selector switch (not part of the scope of
delivery).
To select video playback for the cabin area,
press the
VIDEO
button
6
.
"VIDEO1" appears on the display. The monitors
in the cabin area are automatically switched on
via the corresponding relay.
If 2 video sources are connected,
press the
VIDEO
button
6
during the
video playback to switch between the two
video sources.
The display shows either "VIDEO1" or
"VIDEO2" for the currently selected video
source.
Note:
To be able to select a second video
source via the device, it must be
switched on in the menu (see the
next section).
Switching the second video source
on/off
Press the
MENU
button
:
.
Press the
or
button
9
repeatedly
until the display shows "MORE" and wait
until "CODE" appears.
Press the buttons
RADIO
3
and
MAP
8
at the same time.
Press the
or
button
9
repeatedly
until the display shows "VID2" and the
current setting "ON" or "OFF".
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
02_CCA47_en_neu.indd 18
02_CCA47_en_neu.indd 18
09.10.2009 18:22:31 Uhr
09.10.2009 18:22:31 Uhr