Bosch Carephone 62 CRS-H62M-GB, Руководство пользователя

Страница: 37 / 72

Carephone 62 Programming | en 37
TeleAlarm User Manual F.01U.141.162 | V6 | 2015.04
Easy wireless transmitter registering on the keyboard
– Press P , 9 and 1 together for at least two seconds.
– The unit waits for a wireless signal.
– Press the button of the wireless transmitter.
– Press C to confirm.
The code number of the wireless transmitter is registered in
Selection 91 (erasing the previous code number).
Enter easy unit ID programming
– Press P , 3 and 0 together for at least two seconds.
– The unit goes directly to Programming Step 30 .
– Type the unit ID (device number) with numeric keys, the
unit ID can be up to 12 digits long.
– Press C to confirm.
Enter easy GSM phone number programming
– Press P , 4 and 9 together for at least two seconds.
– The unit goes directly to Programming Step 49 .
– Type the phone number of the GSM Module with numeric
keys, it can be up to 22 digits long.
– Press C to confirm.
Enter easy SIM card PIN code programming
– Press P , 4 and 7 together for at least two seconds.
– The unit goes directly to Programming Step 47 .
– Type the PIN code of the GSM SIM card with numeric keys,
it can be up to 8 digits long.
– Press C to confirm.
Remote programming (incoming)
– Press the button <Grey> 3 times.
The device acknowledges by announcing "Setup activated" and
enters the incoming remote programming mode.
Set date and time with the keyboard
– Press P and B together for at least 2 seconds.
– The four indicator lamps light up bright.