en |
41
7 620 000 130 - 133 | 10.2010
Robert Bosch Car Multimedia GmbH
en
Tone
Adjusting the treble (TREB) and
bass (BASS).
f
Press the
AUD
;
button to open the
menu.
f
Press the
AUD
;
button repeatedly until
"BASS" or "TREB" appears on the display
along with the current setting.
f
Turn the volume controller
1
to the left
or right in order to set bass or treble levels
to b7 and -7.
In order to leave the menu
f
press the
AUD
;
button, repeatedly if
necessary.
Adjusting the left/right volume
balance (BAL) and the front/rear
balance (FAD)
f
Press the
AUD
;
button to open the
menu.
f
Press the
AUD
;
button repeatedly until
"BAL" or "FAD" appears on the display
along with the current setting.
f
Turn the volume controller
1
to the left
or right in order to set the volume balance
to b10 and -10.
In order to leave the menu
f
Press the
AUD
;
button, repeatedly if
necessary.
Note:
The "FAD" adjustment is only
available on the
7 620 000 130 / 132 devices.
Switching the loudness (LD) on
and off
f
Press the
AUD
;
button to open the
menu.
f
Press the
AUD
;
button repeatedly until
"LD" appears on the display, along with
the current setting, "ON" or "OFF".
f
Turn the volume controller
1
to the left
or right in order to switch the loudness on
or off.
In order to leave the menu
f
Press the
AUD
;
button, repeatedly if
necessary.
Resetting the tone
You can reset all the tone adjustments to their
factory default settings.
f
Press the
AUD
;
button to open the
menu.
f
Press the
AUD
;
button repeatedly until
"RESET N" appears in the display.
f
Turn the volume controller
1
to the right
in order to select "RESET Y".
After about 2 seconds all the tone adjustments
will be reset.
In order to leave the menu
f
Press the
AUD
;
button, repeatedly if
necessary.
Note:
You can reset the tone adjustments at
any time, by holding down the
AUD ;
button for longer than 2 seconds.
This only resets the treble and bass
adjustments for the audio source
being used at the time.
Tone
02_Calais USB_en.indd 41
26.10.10 15:18