MY22B0a - 62_1.0_15.09.2021
63
Assembly
5.3.1.1 Securing the PowerTube BS3 battery mount
Only applies to pedelecs with this equipment
The BOSCH PowerTube BS3 battery mount must
be secured by clamping a clip on its rear.
1
Use a TORX® T25 wrench to undo the screws
in the battery mount.
Figure 47: Undoing screws on battery mount
2
Remove battery mount and turn over.
3
Clamp the clip (VLD-I-1222) onto the battery
mount on the rear.
Figure 48: Clip (VLD-I-12122)
Figure 49: Clamping the clip
4
Turn battery mount over and place on the
aluminium brace in the frame.
5
Use a TORX® T25 wrench to fasten the screws
into the battery mount.
Содержание BULLS KIOX300
