Bosch BULLS 650-185, Руководство по эксплуатации

Страница: 67 / 238

66
Assembly
5.3.3.2 20 mm
thru axle
Only applies to Suntour forks with this equipment
1 Insert the
thru axle
into the hub on the drive
side.
Figure 56: Inserting the
thru axle
in the direction of the
arrow
2 Tighten the
thru axle
with the red handle.
Figure 57: Tighten the axle in the direction of the
arrow
3 Push red lever into the
thru axle
.
Figure 58: Pushing the red lever in the direction of the
arrow
4 Closing the quick release lever.
Figure 59: Pressing the quick release lever in the direction
of the arrow

The
thru axle
is secured.
Crash caused by loose quick release axle
A faulty or incorrectly installed
thru axle
may
become caught in the
brake rotor
and block
the wheel. This will cause a crash.
 Never fit a defective
thru axle
.
Crash caused by faulty or incorrectly
installed
thru axle
The
brake rotor
becomes very hot during
operation. Parts of the
thru axle
may become
damaged as a result. The
thru axle
becomes
loose. This will cause a crash with injuries.
 The
thru axle
and the
brake rotor
must be
opposite one another.
Crash caused by incorrectly set
thru axle
Insufficient clamping force will result in
unfavorable transmission of force. The
suspension fork or the quick release axle may
break. This will cause a crash with injuries.
 Never fasten the
thru axle
with a tool (e.g.
hammer or pliers).
CAUTION
!