RE 95240-01-B/2021-01-12, Bosch Rexroth AG
Maintenance and repair |
BODAS controller RC/3x and RC/4x
19
/24
10 Maintenance and repair
10.1 Cleaning and care
NOTICE
Damage to seals and electronics/electrics due to mechanical effects!
The water jet of a high-pressure cleaner may damage the seals and
electronics/electrics of the control unit!
▶ Do not point the high-pressure cleaner directly towards the control unit.
For cleaning and care of the control unit, observe the following:
▶ Check whether all the seals and fittings on the plug-in connections are securely
seated to ensure that no moisture can penetrate into the control unit and the
installation space during cleaning.
▶ Use only very small amounts of water and, if necessary, a mild cleaning agent to
clean the control unit. Never use solvents or aggressive cleaning agents.
10.2 Inspection and maintenance
No special activities are necessary.
10.3 Repair
The control unit cannot be repaired.
When replacing the control unit, make sure that no contamination can penetrate the
mating connector.
▶ Only use an original spare control unit from Rexroth, otherwise the functional
reliability cannot be guaranteed, and the warranty will be voided.
▶ Control units can be found online at
www.boschrexroth.com/eshop
Address all questions regarding repair to your responsible Bosch Rexroth service.
