18
/24
BODAS controller RC/3x and RC/4x
| Commissioning
Bosch Rexroth AG, RE 95240-01-B/2021-01-12
8 Commissioning
During all work for commissioning the control unit, observe the general
safety instructions and intended use detailed in chapter 2"Safety instructions" on
page 7.
▶ When commissioning the control unit, the machine may pose unforeseen dangers.
Before commissioning the system, you must therefore ensure that the vehicle and
the hydraulic system are in a safe condition.
▶ The control unit is generally commissioned via a software application. Please
refer to the software manual for the respective series.
9 Operation
Use the control unit only within the performance range specified in the technical
data.