Bosch BFL523MS0, Руководство пользователя и инструкции по установке

Страница: 19 / 24

Installation instructions
en
19
Food Amount Microwave power
setting in W Cooking time in mins
Vegetables, 1 portion
8
150 g 600 2–3
Vegetables, 2 portions
8
300 g 600 3–5
1
Place a spoon in the glass.
2
Do not overheat alcoholic drinks.
3 Check the food occasionally.
4 Heat up baby food without the teat or lid.
5
Always shake the food well after heating.
6
Always check the temperature.
7 Separate the slices of meat.
8 Add a little liquid to the food.
14.5 Test dishes
These overviews have been produced for test institutes to facilitate appliance testing in accordance with EN
60350-1:2013 or IEC 60350-1:2011 and EN 60705:2012, IEC 60705:2010.
Cooking with the microwave
Food Microwave power
setting in W Cooking time in mins Note:
Custard, 750 g
1.
360
2.
90
1.
12–17
2.
20–25
Place the Pyrex dish 20 x 25 cm
on the turntable.
Biscuit 600 8–10 Place a 22 cm diameter Pyrex
dish on the turntable.
Meat loaf 600 20–25 Place a Pyrex dish on the
turntable.
Defrosting with the microwave
Recommended settings for using the microwave to defrost food.
Food Microwave power
setting in W Cooking time in mins Note:
Meat
1.
180
2.
90
1.
5–7
2.
10–15
Place the Pyrex dish (22 cm dia-
meter) on the turntable.
15 Installation instructions
Observe this information when installing the appliance.
15.1 Safe installation
Follow these safety instructions when in-
stalling the appliance.
¡
The appliance can only be used safely if it
is correctly installed according to the safety
instructions. The installer is responsible for
ensuring that the appliance works perfectly
at its installation location.
¡
Check the appliance for damage after un-
packing it. Do not connect the appliance if
it has been damaged in transit.
¡
Before starting up the appliance, remove
any packaging material and adhesive film
from the cooking compartment and the
door.
¡
Never remove the transparent film on the
inside of the door.
¡
Proceed in accordance with the installation
sheets for installing accessories.
¡
Fitted units must be temperature-resistant
up to 90 °C, and adjacent unit fronts up to
65 °C.