manualshive.com logo in svg

Bosch BC2600RA, Руководство пользователя

Поделиться
Скачать
Bosch BC2600RA Скачать руководство пользователя страница 29

29

Operating Instructions

Priority

Burner on

Temp.

Bath Fill

ON/OFF

Bath Fill

Volume

setting

Set Time

Press 2sec.

to set time

Main Controller

YPRM67XB

Flashing

åÃè·ï\é¶Ç Ç®í

≤

Ç

◊

Ç

≠

ÇæÇ

≥

Ç¢

 åÃè·ï\é¶Ç Ç®í

≤

Ç

◊

Ç

≠

ÇæÇ

≥

Ç¢

Check for an Error Code

If there is a problem with the unit, a numerical error code will flash on
the remote controller.
If this occurs, take appropriate measures as listed below.

When an error code appears, the display and the operation light
will flash together.

Main Controller

Have a professional check the gas supply pressure.
Contact Bosch 1300-30-70-37.

Abnormal combustion,
low gas supply pressure

Error Code

Cause

Action

Ignition error

Check whether the gas valve is open. Press the operation button to
turn the unit off, open a  hot water fixture, and turn the unit back on.
If the flashing number doesn't return the problem is solved.

Contact the installer or Bosch Service Department for
assistance.

Clogging of neutralizer

    Contact Bosch if:

• Any other error code appears.
• An error code is indicated again after the above actions were followed.
• There are any other questions.

The hot water is turbid.

• This is harmless.  Small bubbles appear as the air in the water

is heated and depressurized rapidly to atmospheric pressure.

The water appears blue
The bath tub/wash-basin has turned
blue.

• Coloration to a blue colour may be noticed from small traces of

copper ion contained in the water and fat (furring). However,
there are not problems concerning health. Coloration of the
bath tub/wash-basin can be prevented by cleaning frequently.

(Continued)

Frequent water discharge from the
drain pipe.

• Condensation forms inside the unit during operation

and is discharged from the drain pipe.

The equipment can be used for awhile, but the maximum hot
water flow available from the unit will be reduced.  Contact
the installer or Bosch Service Department  for assistance.

The neutralizer needs to
be replaced soon.

The equipment cannot be used.
Contact the installer or Bosch Service Department for
assistance.

The neutralizer has reached
the end of its service life
and must be replaced.

Contact the installer or Bosch Service Department for
assistance.

Abnormal combustion

Содержание BC2600RA





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды