BAT 135 | REV. A | JANUARY 2018
Operating Instructions
|
BAT 135 Battery Tester
| 5 | en
8. Press to confirm the temperature.
Press ENTER to begin the test.
Note: Before the test is started, you can always return to the previous page by pressing and holding ENTER for
two seconds.
Important: If prompted by the tester to remove a surface charge, refer to Appendix B, Surface Charge Notice.
6
Start/Stop Test
1. Press to select Start/Stop Test, then press ENTER.
2. Press to select one of the following the battery types:
}
EFB
}
AGM FLAT
Press ENTER to confirm choice.
3. Press to select one of the following battery ratings:
}
CCA/SAE
}
EN
}
JIS
}
DIN
}
IEC
}
CA/MCA
Press ENTER to confirm choice.
4. Press to input one of the following battery capacities of SAE:
}
CCA/SAE: 40~2000
}
EN: 40~1885
}
DIN: 25~1120
}
IEC: 30~1320
}
JIS: By battery type number
}
CA/MCA: 50~2400
Press ENTER to begin test.
5. Press to confirm temperature.
Press ENTER to begin test.
Note: Before the test is started, you can always return to the previous page by pressing and holding ENTER for
two seconds.
Important: If prompted by the tester to remove a surface charge, refer to Appendix B, Surface Charge Notice.
Example
Example
Example
Example
Example
