Bosch B3512 Скачать руководство пользователя страница 130

Страница: 130 / 228

Part On status.
– Green. Ready to turn Part On.
– Red. Part On (part armed).

Power. The blue power plug indicates whether the
control panel has AC power.
– ON Steady. The AC (mains) power to the control

panel is present.

– Flashing. AC (mains) power to the control panel

is not present and the control panel is operating
from the battery.

– OFF. There is no power to the control panel.

Trouble. The yellow caution lights when a trouble
condition exists.
– ON Steady. There is a system, device, or point

trouble.

– OFF. There are no system, device, or point

troubles.

All On status.
– Green. Ready to turn All On.
– Red. All On (all armed).

130 en | B91x Keypad operation overview

Control Panels

2015.01 | 02 | F.01U.307.371

Bosch Security Systems, Inc.

Содержание B3512





































































































































































































































Результаты поиска

Содержание B3512

Отзывы:

Бренды по названию

Популярные бренды

Bosch B3512, Руководство пользователя

Результаты поиска

Содержание B3512

Отзывы:

Бренды по названию

Популярные бренды