8
en | For your safety
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
2020-07 | 3.0 | F.01U.378.877
User Guide
Bosch Sicherheitssysteme GmbH
1.3
Usage in accordance with regulations
Notice!
Terminology
The term
Walktest
, which is used in the fire panel and in the documentation, corresponds to
the EN54‑2 standard term
Test condition.
The panel controller is designed for operating the AVENAR panel 8000/2000 fire panel. It can
perform the following tasks:
–
Displaying and processing various message types such as alarm and trouble messages
–
Bypassing, blocking and resetting elements
–
Monitoring and controlling of sounders and outputs
–
Performing a walktest
–
Display diagnostic information about every LSN element
–
Configuration of detectors (short texts and detector sensitivity)
–
Performing a drill
–
Saving, displaying and printing out events
–
Switching the system to day or night mode.
Notice!
The manual control of evacuation zones and the outputs connected to fire protection
equipment (e-Matrix) are user features without regulatory requirements, as these features are
not within the scope of EN54-2.
1.4
Skills required by personnel
Display of event messages on the panel controller must only be processed by trained
personnel.
The system walk test and detector configuration must only be performed by trained,
authorized personnel.
