Bosch AutoDome Junior HD VJR Series, Руководство по эксплуатации

Страница: 44 / 114

AutoDome Junior Programmed N.C.
Circuit Alarm Indication
Open Alarm
Closed Normal
Alarm Outputs
The AutoDome Junior incorporates one (1) alarm output: an open collector output.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
C
E
B
NPN
Figure 9.4: N.O. - Normally Open
Ref. # Description Color
1 Dome n/a
2 Normally Open White
3 Ground Green
4 Alarm In n/a
5 User Supplied Device (i.e. Allegiant or DVR) n/a
6 Ground/Common n/a
Connecting an Open Collector Output
Output 1 is an open collector. This output must be connected to a positive voltage between 5
and 32 V to complete the circuit, with a maximum voltage rating of 32 VDC @ 150 ma.
1.
Connect the appropriate stripped wire to the open collector of the transistor’s white
wire.
2. Connect the appropriate stripped wire to the ground (GND) connector.
Audio Cables
The AutoDome Junior is capable of receiving line input audio signals and transmitting it over a
network. The audio signal is transmitted one-way and in sync with the video signal.
Refer to Basic Mode: Audio, page 64.
Audio Line Input Specifications
9.3
9.3.1
9.4
44 en | Audio, Alarms and Relay Connections AutoDome Junior HD Series
2014.11 | 6.1 | F.01U.275.803 Operation Manual Bosch Security Systems, Inc.