Bosch AUTODOME IP starlight 5000i IR, Руководство пользователя

Страница: 11 / 72

AUTODOME IP starlight 5000i IR Operation via the browser | en 11
Bosch Security Systems User Manual 2019.11 | 1.2 |
3.1.4 AUX Control
With the tab AUX Control you can enter pre-programmed keyboard control commands. These
commands are composed of a command number plus the appropriate function key ( Show pre-
position , Set pre-position , AUX on , or AUX off ). A valid combination either issues a command
to the device or displays an on-screen menu.
(Refer to the “AUX Commands” section of the manual for a list of all AUX commands for your
camera.)
Show pre-position
Click this button to display a pre-position.
Set pre-position
Click this button to set a pre-position.
AUX on
Click this button to activate an AUX command.
AUX off
Click this button to deactivate an AUX command.
3.1.5 Digital I/O
(only for cameras with alarm connections)
Depending on the configuration of the unit, the alarm input and the output are displayed next
to the image. Expand the Digital I/O group if necessary.
The alarm symbol is for information and indicates the status of an alarm input:
–
The symbol lights when the input alarm is active.
The alarm output allows the operation of an external device (for example, a light or a door
opener).
–
To activate the output, click the checkmark symbol.
–
The symbol lights when the output is activated.
Input 1
This parameter identifies the first alarm input.
Input 2
This parameter identifies the second alarm input.
Output 1
Click the checkmark icon to enable the output. The checkmark becomes green.
Note : You can change the name of an alarm input in Configuration > Interfaces > Alarm
Inputs > Input 1 (or Input 2) > Name .
You can change the name of an alarm output in Configuration > Interfaces > Alarm Outputs >
Output name .
3.1.6 Special Functions
Tour A / Tour B
Click one of these buttons to start the continuous playback of a recorded (guard) tour. A
recorded tour saves all manual camera movements made during the recording, including its
rate of pan, tilt and zoom speeds, and other lens setting changes.
To stop a tour, click a directional control in the View Control tab.
Find home
Click this button to trigger the camera to seek its home position. The OSD displays the
message, “OSD: Finding Home Position.”
Focus
Click this button to activate the Auto Focus One Push mode on the camera.