Bosch Autodome Inteox 7000i-2MP, Руководство по установке

Страница: 13 / 44

AUTODOME inteox 7000i - 2MP (in-ceiling) Product description | en 13
Bosch Security Systems
Installation Manual
2021-08 | 1.4 |
3 Product description
The AUTODOME inteox 7100i camera is based on an open operating system. With technology
for excellent low-light sensitivity, Intelligent Video Analytics, and video streaming, the camera
supports superior intelligence and imaging at the edge. The design of the camera gives
undistorted, high-resolution video above the horizon, which is helpful in city landscapes that
are not completely flat.
The AUTODOME inteox 7000i camera is an advanced, 30x PTZ surveillance camera based on
an open operating system, driven by OSSA, from Security and Safety Things. With starlight
imaging technology for excellent low-light sensitivity, the most robust Video Analytics on the
market, and video streaming, the camera delivers unmatched picture quality. Even under the
most challenging light conditions, the camera delivers high-definition (HD) 1080p video. Easy
to install, the camera is available in either a field-proven, outdoor pendant housing or an
indoor, in-ceiling housing.
The camera has been designed for quick and easy installation, a key feature from Bosch IP
video security products.
All housings feature recessed screws and latches for increased tamper resistance.
In an enclosed installation area, still air can cause the operating temperature of the camera to
go above the maximum. If you install a camera in an enclosed area, make sure that the
operating temperature of the camera does not go above the maximum temperature. The
maximum operating temperature is:
–
+40 °C (+104 °F) for in-ceiling models
– +55 °C (+131 °F) for pendant models
Make sure that air circulates around the camera to supply cooling.