Bosch AUTODOME 5000, Руководство по установке

Страница: 9 / 22

Recessed Mount Installation Instructions
1.
Find a secure location on the ceiling and apply the ceiling guide pattern the ceiling tile or
drywall. Use the pattern as a template to cut the proper circle in the ceiling.
2. Place the Ceiling Bracket (1) into the ceiling and make sure the three support wings of
the bracket are completely flush with the ceiling board.
3. Attach the Dome Camera (5) to the Housing Frame (4) by fastening the three (3) M4x10
screws.
4. Connect the Safety Tether, attached to the Ceiling Bracket (1), to the Housing Frame (4).
5. Thread all connection cables through the center hole of the Ceiling Bracket and through
the Rubber Gasket (3).
6. Connect all cables to the camera back plate.
7. Insert the Housing Frame (4) with the camera into the Ceiling Bracket (1) and securely
fasten the screws on the Housing Frame to the Ceiling Bracket.
8. Place the Trim Ring (6) over the exposed part of the camera and affix it to the Housing
Frame (4).
AUTODOME 5000 PTZ Camera Installing a Recessed Mount | en 9
Bosch Security Systems, Inc. Installation Guide 2013.07 | 1.3 |