Bosch AutoCook MUCC222WCN, Инструкция по эксплуатации

Страница: 24 / 32

24
en Changing presettings
7. Once the target temperature is reached,
the lines go out and the remaining
preparation time is shown in the display.
Note: For programmes with several
preparation steps, once the target
temperature has been reached or once the
preparation step is completed, a signal tone
sounds. Add further ingredients and press
button
G
to start the next preparation step.
8.
When the preparation programme ends,
a signal tone sounds, and the indicator
[ ] (finished) and button
G
light up.
The display flashes and shows “00:00”.
Note: For some programmes, once
complete, the keep warm function is
automatically activated. The indicator
[ ] (keep warm) lights up.
9. Press button
B
to switch to standby
mode. Disconnect the mains plug.
10.
Serve the finished dish and let the
appliance cool down completely.
■ Once it has cooled down completely,
clean all of the parts. X
“Cleaning and
maintenance” see page 27
Prematurely terminating the
current preparation step
If the ingredients are cooked ahead of time
during one of the preparation steps, the
step can also be terminated manually.
■ Press button
G
for at least 2 seconds.
■ This will terminate the current
preparation step. A signal tone will then
sound once the next step can be carried
out.
■ In the control panel, LEDs 1, 2, 3 or 4
are shown accordingly and button
G
flashes.
■ Press button
G
to start the next
preparation step.
Prematurely terminating the
preparation programme
■ Press button
H
to end the preparation
programme.
my recipe
Manual cooking with individual settings for
the preparation time and temperature.
■ Once the appliance has been switched
on, in function selection mode, button
B
and the indicator [ ] (my recipe)
are permanently lit. Button
G
flashes.
“00:00” lights up in the display.
■ Press button
F
once. “00:00” flashes in
the display.
■ Keep pressing, or press and hold,
button
F
until the desired preparation
time is displayed.
■ Press button
C
once. “00c” flashes in the
display.
■ Keep pressing, or press and hold,
button
C
until the desired preparation
temperature is displayed.
■ Press button
G
to start or continue
the preparation programme with the
individual values.
■ The appliance heats up the pan until the
target temperature is reached.
■ Once the target temperature is reached,
the lines go out and the preparation time
is shown in the display. The preparation
process starts automatically.
Changing presettings
Depending on the programme, the pre-
configured values for temperature, time or
start time delay can be changed according
to your individual needs.
The values are set by pressing the
applicable button. The values will change
faster if the button is pressed and held
down. Once the maximum value of a setting
has been reached, the display will jump
back to the minimum value.
Setting a start time delay
Depending on the preparation program, the
time until the programme is started can be
set.
■ Select the preparation programme.
■ Press button
A
. Button
G
flashes.
A pre-configured value flashes in the
display.