Handling the remote controller
Climate 5000 – 6 720 866 393 (2019/11)
15
Replacing batteries
The following cases signify exhausted batteries. Replace old
batteries with new ones.
•
Receiving beep is not emitted when a signal is
transmitted.
•
Indicator fades away.
The remote controller is powered by two dry batteries (AAA)
housed in the back rear part and protected by a cover.
1)
Remove the cover in the rear part of the remote controller.
2)
Remove the old batteries and insert the new batteries,
placing the (+) and (-) ends correctly.
3)
Install the cover back on.
NOTE: When the batteries are removed, the remote controller
erases all programming. After inserting new batteries, the
remote controller must be reprogrammed.
CAUTIONS
•
Do not mix old and new batteries or batteries of different
types.
•
Do not leave the batteries in the remote controller if they
are not going to be used for 2 or 3 months.
•
Dispose batteries correctly.
