Bosch ALB 18 LI, Оригинальное руководство пользователя

Страница: 15 / 268

English | 15
Charger AL 1810 CV AL 1815 CV AL 1830 CV AL 1880 CV
– Battery with 2.5 Ah min 154 105 60 36
– Battery with 3.0 Ah min 185 130 72 46
– Battery with 4.0 Ah min 244 168 95 35
– Battery with 6.0 Ah min 364 260 130 62
Weight according to EPTA‑Pro-
cedure 01:2014 kg 0.17 0.38 0.40 0.60
Protection class
/ II / II / II / II
Noise/Vibration Information
3 600 HA0 3..
Noise emission values determined according to EN 50636-2-100 .
Typically the A-weighted noise levels of the product are:
– Sound pressure level dB(A) 60
– Sound power level dB(A) 80
– Uncertainty K dB = 3.0
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 50636-2-100
– Vibration emission value a
h
m/s
2
< 2.5
– Uncertainty K m/s
2
= 1.5
Assembly
u
Caution: Switch garden tool off and remove battery
from machine before adjusting or cleaning.
Mounting the nozzle (see figure B)
Slide the nozzle (4) onto the motor unit. Take care not to
pinch your fingers during assembly.
Inserting/Removing the Battery (see figure C)
Note: Using unsuitable batteries can lead to malfunctions or
damage the machine.
Insert the charged battery
(5) . Ensure the battery is inserted
correctly.
To remove the battery
(5) from the machine, press the bat-
tery unlocking button and pull the battery out.
Switching on
u
Before any work on the garden product itself (e. g.
maintenance, tool change, etc.) as well as during
transport and storage, remove the battery from the
garden product.
There is danger of injury when uninten-
tionally actuating the On/Off switch.
u
The machine continues to blow for a few seconds after
being switched off. Allow the motor to stop rotating
before switching “on” again.
Do not rapidly switch off and on.
Charging the Battery
u
Observe the correct mains voltage! The voltage of the
power supply must correspond with the data given on
the nameplate of the battery charger. Battery char-
gers marked with 230 V can also be operated with
220 V.
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 35 °C. In this manner, a high battery service life is
achieved.
Note: The battery is supplied partially charged. To ensure
full battery capacity, completely charge the battery in the
battery charger before using for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not cause damage to the battery.
The “Electronic Cell Protection (ECP)” protects the lithium-
ion battery against deep discharging. When the battery is
empty, the product is switched off by means of a protective
circuit: The product no longer operates.
Do not continue to press the On/Off switch after an auto-
matic shut-off of the product.
The battery could become
damaged.
Charging Procedure
The charging procedure starts as soon as the mains plug of
the charger is plugged into a socket outlet and the battery
(5) is inserted onto the charger (6) .
Due to the intelligent charging method, the charging condi-
tion of the battery is automatically detected and the battery
Bosch Power Tools F 016 L94 138 | (03.11.2020)