background image

Environment / disposal

 | 

17

6 720 811 270 (2015/04)

AGS10-2, AGS10E-2, AGS20-2, AGS50-2

6.4

Completion of work

To close the solar pump station: 
▶ Push the cover onto the solar pump station. 

Fig. 28

Fig. 29 Do not cover the ventilation slots

7

Environment / disposal

Environmental protection is a fundamental corporate strategy of the 
Bosch Group. 
The quality of our products, their efficiency and environmental safety 
are all of equal importance to us and all environmental protection 
legislation and regulations are strictly observed.
We use the best possible technology and materials for protecting the 
environment taking into account of economic considerations.

Packaging

We participate in the recycling programmes of the countries in which our 
products are sold to ensure optimum recycling. 
All of our packaging materials are environmentally friendly and can be 
recycled.

Old appliance

Old appliances contain materials that must be recycled.
The relevant assemblies are easy to separate, and all plastics are 
identified. In this manner the individual components are easily sorted 
and added into the recycling and disposal systems.

NOTICE: 

Damage to pump through overheating. 

▶ Ensure that the ventilation slots in the cover are freely 

accessible from above and below. 

6720801165.12-2.ST

6720801165.13-2.ST

Содержание AGS10-2





























Отзывы: