Waste water pump
Large food remnants in the rinsing water not retained by the ilters may
block the waste water pump. The rinsing water does not get pumped
out and covers the ilter.
in this case:
Disconnect the appliance from the power supply.
•
Remove the ilters.
•
Scoop out water, use a sponge if required.
•
Using a spoon, prise off pump cover(as illustrated) until it clicks,
•
then grip the cover by the lug and irst pull it upwards until it resists
and then pull it out forwards.
Check inner compartment and remove any foreign objects.
•
Place cover in the original position, press down and engage.
•
install ilters
•
1
2
3
Klick
18
