background image

4  |

  

Bosch Climate 5000 Series Wired Wall Thermostat                                                                                        

                                                

User Manual

06.2019 

|

 Bosch Thermotechnology Corp.

Data subject to change

1     Key to Symbols and Safety Instructions

1.1     Key to Symbols

 

Warnings

        Warnings in this document are identifi ed by a 

warning triangle printed against a grey background.
Keywords at the start of a warning indicate the type and seriousness  
of the ensuing risk if measures to prevent the risk are not taken.

The following keywords are defi ned and can be used in this document:

 

DANGER 

indicates a hazardous situation which, if not avoided, will result 

in death or serious injury.

 

WARNING

 indicates a hazardous situation which, if not avoided, could 

result in death or serious injury.

 

CAUTION

 

indicates a hazardous situation which, if not avoided, could 

result in minor to moderate injury.

 

NOTICE 

is used to address practices not related to personal injury.

Important information

 

   This symbol indicates important information where

there is no risk to people or property.

2     Remote Controller Speci

fi

 cations

IDU Type

Wall Mounted

Cassette & Ducted 

Model Name

BMS-WT1-XXX

BMS-WT2-XXX

Model #

8733953127

8733953128

Input Voltage

DC 5V

DC 12V

Environment (ºF / ºC)

23~110 / -5~43

Table 1

 

   Button design is based on a typical model and might be slightly diff erent

 from the actual one you purchased, the actual shape shall prevail.

    

WARNING:  

 

 

This product can expose you to chemicals including Lead 
and Lead components, which are known to the State 
of California to cause cancer and birth defects or other 
reproductive harm. For more information go to 

www.

P65Warnings.ca.gov

.

Содержание 8733953127





















Отзывы: