TECHNICAL SERVICE BULLETIN
BOSCH, THERMADOR, AND SIEMENS BUILT-IN WALL OVENS
58300000169667 ABZ EN A
NOVEMBER 2012
Page 2/4
Continued next page~
R
EPLACING A
M
ETEOR
L
ATCH ON A
27”
S
INGLE
O
VEN OR
U
PPER
O
VEN
Kit Components Required: HTI Latch, Bottom Mounting Plate
1.
Disconnect power to the oven.
2.
Remove the screws securing the black latch plate to the
oven, and set parts aside.
3.
Remove the 2 outermost screws securing the latch assembly
(with bottom mounting plate attached) to the plenum
bracket, and slide the latch assembly forward; set screws
aside.
4.
Disconnect the harness wires attached to the latch assembly
and the HTC.
5.
Remove the 2 screws securing the latch assembly to the
bottom mounting plate; set screws aside and discard the
mounting plate.
6.
Secure the new latch assembly to the new bottom mounting
plate provided in the service kit using the 2 original screws.
7.
Connect the harness wires to the new latch assembly.
8.
Attach the new latch assembly (with new bottom mounting
plate attached) to the plenum bracket using the two original
screws.
9.
Reinstall the black latch plate using the original screws.
10.
Restore power and test operation.
R
EPLACING A
M
ETEOR
L
ATCH ON A
27”
L
OWER
O
VEN
Kit Components Required: HTI Latch, Bottom Mounting Plate, Screws
1.
Disconnect power to the oven.
2.
Remove the screws securing the black latch plate to the oven,
and set parts aside.
3.
Remove the 2 outermost screws securing the latch assembly
(with bottom mounting plate attached) to the plenum bracket,
and slide the latch assembly forward; set screws aside.
4.
Disconnect the harness wires attached to the latch assembly
and the HTC.
5.
Remove the 2 screws securing the latch assembly to the
bottom mounting plate; set screws aside.
6.
Remove the HTC from the bottom mounting plate; set the
HTC aside and discard the screws and mounting plate.
7.
Secure the new latch assembly to the new bottom mounting
plate provided in the service kit using the 2 original screws.
8.
Attach the original HTC to the right side of the new bottom
mounting plate using the 2 screws included in the service kit.
9.
Connect the harness wires to the new latch assembly.
10.
Reattach the latch assembly (with new bottom mounting plate
attached) to the plenum bracket using the two original
screws.
11.
Reinstall the black latch plate using the original screws.
12.
Restore power and test operation.
Attach HTC to new bottom mounting
plate using 2 screws in service kit
