English |
19
Bosch Power Tools
F 016 L81 659 | (7.10.16)
If you are unable to resolve the problem using the Troubleshooting guide then please contact your dealer in the first instance.
After use/Storage
Correct storage is essential for maintaining the life of the
product. If possible, avoid storage areas with high humidity
which could cause rust or corrosion.
End of season storage: Remove battery and store both ma-
chine and battery in a dry safe place away from direct sun-
light.
Do not place objects on top of the machine.
When storing for extended periods, thoroughly clean the
product beforehand.
After-sales Service and Application
Service
www.bosch-professional.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Cutting blade fails to ro-
tate
Cutting blade obstructed
Check underneath the machine and clear out as
necessary (always wear protective gloves)
Blade nut loose
Tighten nut bolt to 20 Nm ensuring the blade,
nut shield and dome washer are all present and
central (always wear protective gloves) (see
figure 5 of illustrations)
Low battery charge
Check the charge remaining in the battery –
shown on the battery display
Grass too high/dense
Grass too high: Cut in stages
Grass too dense: Reduce rate of cutting every
time
Battery too hot/cold
Allow battery to cool down/warm up – check
battery display
Motor protector has activated
Allow motor/electronics to cool for 5 minutes
and cut in stages
Poor cutting performance Cutting guard encrusted with debris
Clean inside of cutting guard
Cutting blade blunt
Flip/replace blade
Cutting line short
Bump head to expose more line
No cutting line
Replenish line (see figure 7 of illustrations)
Poor motor performance
Remove cutting system and slip plate and clean
slip plate groove
Problem
Possible Cause
Corrective Action
OBJ_BUCH-2143-003.book Page 19 Friday, October 7, 2016 5:44 PM