Troubleshooting
en-us
43
Issue
Cause and troubleshooting
Food remnants on
dishware.
Dishware was placed too close together or rack is
overfilled.
1.
Arrange dishware with sufficient space in be-
tween.
The spray jets must reach the surfaces of the
dishware.
2.
Avoid points of contact.
Spray arm rotation is blocked.
▶
Arrange dishware so it does not obstruct spray
arm rotation.
Spray arm nozzles are blocked.
▶
Filters are dirty.
▶
Clean the filters.
Filters are inserted incorrectly and/or not en-
gaged.
1.
Insert the filters properly.
2.
Twist filters into place.
Selected wash cycle is too light.
▶
Select a more intensive cycle.
Dishware has been precleaned too intensively.
Then the sensors choose a lighter cycle. Stub-
born remnants cannot be entirely removed.
▶
Only remove large remnants of food and do not
pre-rinse dishware.
Tall narrow containers in corner areas are not
rinsed out adequately.
▶
Do not position tall narrow containers at too
great an angle or in corner areas.
Upper rack on right and left not set to same
height.
▶
Set the upper rack on the right and left to the
same height.
Содержание 300 Series
Страница 59: ......