manualshive.com logo in svg

Bosch 2212, Руководство пользователя

Поделиться
Скачать
Bosch 2212 Скачать руководство пользователя страница 37

37

CODE # OWNER

Indicates the passcode is an Owner
type.

CODE # USER

Indicates the passcode is a User type.

CODE CHANGED

Indicates the passcode has been
changed.

CODE NOT CHANGED

Indicates the attempt to change the
passcode was unsuccessful.

ENTER CODE

This display is shown when a
passcode is being entered.

ENTER CODE TO

TURN SYSTEM OFF

Prompt to enter your passcode to
turn the system off.

ENTER CODE TO

SILENCE ALARM

Prompt to enter your passcode to
silence an alarm.

ENTER CODE TO

SILENCE BELL

Prompt to enter a passcode to silence
the alarm bell.

ENTER CODE TO

START TEST

Prompt to enter a passcode to start
the system test.

ENTER NEW AGAIN

Prompt to enter your new passcode
again.

ENTER NEW CODE

Prompt to enter your new passcode.

ENTER OLD CODE

Prompt to enter your current
passcode.

ENTER OWNER CODE

TO MODIFY CODES

Prompt to enter an Owner type
passcode to change passcodes.

ENTER OWNER CODE

TO CHANGE POINTS

Prompt to enter an Owner type
passcode in order to change watch
points.

## sec to exit !

Displayed during exit delay to show
how much time remains before the
system turns on.

## SEC TO EXIT !

[#] PTS BYPASSED

Indicates the system is turned on
with points bypassed.

FOR NO DELAY

PRESS 9

Prompt to press [9] to turn system
All On with No Delay.

FOR NO DELAY

PRESS 0

Prompt to press [0] to turn system
Part On with No Delay.

Содержание 2212













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды