Bosch 1070 083 221, Руководство по подключению

Страница: 45 / 57

Interfaces 6–11
1070 073 826-101 (01.10) GB
6.6 Mouse port
Mouse PS/2 mouse port
A mouse with PS/2 mini DIN connector can be connected to this port.
CAUTION
An external mouse is to be connected at the CPS21T when the con-
trol panel is connected to a IPC 300. No mouse may then be connec-
ted at the interface “Mouse” of the IPC 300.Otherwise, the mouse si-
gnals may be faulty, even if only one mouse is used.
Female PS/2 mini DIN, 6 pin
Cable length: Max. 1.5 m
Cable type: Screened, min. cross-section 0.14 mm
2
Interrupt (IRQ): 12
BIOS preset: IPC 300: PS/2 Mouse: Auto Detect
1
2
3
Mouse Clock
Mouse Data
4
Mouse
5
max. 1.5 m
Mouse
GND
+5V
Screen applied to metal shell of
plug connector
Screen
2 1
4
3
6
6
5
Mouse
The operating system will not recognize the insertion of an external mouse
after completed startup because the mouse initialization occurs during the
boot phase.
.
The connected mouse must be PS/2 compatible.
The BIOS normally reserves IRQ12 for the PS/2 mouse. If there are ad-
dress conflicts, e.g., if IRQ 12 has already been occupied by another
PC expansion card, you should change the IRQ of the expansion card
to one that is still free.