Boscarol BSU402 Скачать руководство пользователя страница 16

ED01_REV01-2021 IFU OB500_ENG

 

16- 32 

7.4.

 

 SERRES® jar for OB500 LINER  

The SERRES® suction jar is suitable for disposable bags from the same manufacturer (as 

for the OB-J FM version) and is made of transparent plastic (polycarbonate). It 

comprises a container (1), a grey movable connector for connection to the suction 

control module (2) and a SERRES® disposable bag (3) complete with disposable 

connector (white in the picture). The antibacterial filter is integrated in the green lid of 

the disposable bag and prevents aspirated fluids from entering the suction unit. The jar 

of secretions (not the disposable bag) can be sterilised in a conventional steam 

autoclave at a maximum temperature of 121° C and a pressure of 2 bar (200 kPa). The 

disposable bag must be replaced after use on the same patient or if it is full. 

 

 

 

Risk of infection

 

 

Please always keep at least three ® SERRES bags in reserve.  

 

Always wear gloves and personal protective equipment when 

changing the SERRES® bag and for disposal. 

 

Before each use, check that the SERRES® container has not already 

been used. 

 

Always 

replace the contaminated disposable bag with a new one.  

7.5.

 

Secrets jar connection  

The  suction jar  must be connected to the control unit module 

(which can be recessed or fixed externally to the wall). 

Depending on the version of the control module (external or flush-

mounted), the suction jar must be connected to the control unit via 

the silicone tube from the jar. In the adjacent photos you can see 

the OB-J FA suction jar  connected to the external wall-mounted 

module (photo A)  and the pipe  connection  point in the built-in 

version (photo B). 

A

 

 

 

 

 

 

B

 

7.6.

 

Sterile disposable Yankauer catheter with suction control system  

OB500 is sold complete with a sterile Yankauer type suction catheter and two tubes for 
connection from the jar to the regulating unit and from the regulating unit to the suction 
unit respectively. The suction probe and catheter are disposable and must be changed after 
each use. To facilitate correct operation, the tip of the rigid suction probe is angled so that 
it can reach all parts of the mouth and upper airway. The rigid suction tip is spherical and 
equipped with lateral holes to avoid damage to tissue during suction. 

 

 

 

 

Yankauer  

 

The Yankauer suction catheter is a sterile, single-use medical device. Never reuse this 
device. It must be disposed of after use on the patient. 

Caution!

  Never use sterile medical devices beyond their expiry date or if the packaging is 

damaged. 

Always connect the Yankauer catheter to the "PATIENT" side on the lid of the reusable jar (FA) or 
SERRES® disposable bag via the white conical fitting. 

7.7.

 

Silicone suction tube and sterile Fingertip (conical fitting)  

On request, the device can be equipped with a silicone patient tube (length: 130 cm) and 

a sterile conical Fingertip fitting that allows the use of standard sterile catheters of an 

appropriate size. The tube is reusable. 

 

From the suction 

jar 

Содержание BSU402

































Отзывы: