Bosca Limit 380 Скачать руководство пользователя страница 12

OPERATING INSTRUCTIONS

— 10 —

7. To refit the baffle in its regular 

position (follow the indications recom-

mended in the instructions to dismount 

the baffle).

2

3

1

How do I remove the ash from my stove?

Check that your stove is cold and proceed to empty the firebox with a shovel into a non-combustible 

container, preferably with a layer of sand on the bottom of it.

Take the ashes outside the house to a safe location. Remember that live coals can remain lit for up to 

36 hours. The ash of untreated wood makes an excellent fertilizer for your garden.

IMPORTANT

Always maintain a bed of ash on the inside of the firebox as this 

will make the accumulation of live coal and reloading easier.

How do I clean the glass on my stove?

One of the main attractions of your Bosca fire is the visible fire. However, often this is limited because 

of spots that appear on the glass of the stove. To avoid this follow the instructions below:

– The main cause of spots on the glass is directly associated with the use of firewood that has a high 

humidity content and maintaining the primary air control on “minimum”. Avoid the occurence of both by 

buying dry firewood and storing it correctly and maintaining the Primary Air Control in the “intermediate” 

position.

CHIMNEY FIRE

What is a chimney fire?

Soot and residue resulting from the combustion of firewood are deposited in the flue. The residue 

is called creosote, which is a fuel. Under certain circumstances, the interior of the flue catches fire 

producing extremely high temperatures that may reach such a level that the flue turns an incandescent 

red color.

Incandescent creosote emanations may appear on the upper extreme of the flue.

What should I do in the case of a chimney fire?

– Stay calm. A properly installed flue in which the correct materials have been used 

should resist the situation without problems.

– Close the door of the stove well and close the Primary Air Control. The fire on the 

inside of the flue will most probably go out in five minutes. Do NOT open the door of 

the firebox or the ashtray door until 30minutes after the chimney fire is extinguished. 

Otherwise, the fire could re-ignite.

– Keep an eye on the flue, especially in the area of the roof space.

– Remove any fuel that may be near the flue.

– If the situation prolongs excessively or if you suspect the installation was not properly 

executed, call the fire department immediately.

– Do not use your stove again until it has been checked by a certified technician.

How can I avoid a chimney fire?

– The key to avoiding a chimney fire is to keep you stove’s gas exhaust system clean.

– To keep the flue clean, your stove must function with a vigorous fire. Avoid using your stove with 

flameless smoking fire.

– When reloading your stove, avoid cooling the existing fire. Place the Primary Air Control on “maxi-

mum” so that the new logs heat quickly. Only after this has occurred should you adjust the Primary Air 

Control to the “intermediate” position.

Содержание Limit 380















Отзывы: