11
10
9
•
Apply Loc�te 243 to the thread
•
Tighten to 7Nm
10
SETTINGS
•
Carefully insert the rod into the cas�ng
11
•
Tighten the lower cartridge nut to a
torque of 10Nm
12
•
Insert the high speed compression
adjustment knob 1
•
Tighten screw 2 with Loc�te 243 to a
torque of 0.35Nm
Be careful not to damage the rod and
the hydraulic stop
Be careful not to exceed the specified
�ghtening torque
13
14
•
Fill the hydraulic cartridge tube with
BOS Bioil
•
The recommended amount of oil is
400ml
SETTINGS
•
Screw the plug back onto the stanchion
to a torque of 10Nm
•
15
•
Insert the lower crown, reposi�on the
frame stops and then the upper crown
•
Make sure to respect the �ghtening
torque of the crown screws (6Nm lower
crown / 7Nm upper crown)
Do not exceed the specified torque as
this may break the threads of the parts
14/16mm Flat wrench
21mm Socket
5mm allen key
1.5mm Allen key
26mm Socket
