9
SM_151815_rev00
Service Manual DEVILLE 35 since year 2017
5
Operations Summary
5.1
STEP BY STEP CHART
For all BOS suspension’s service, the following chart is followed:
1.
Receive the suspension
a.
Fill the traveler included in this manual page 8
b.
Attribute a shop order #, apply this # on the traveler and on the suspension thanks to a tape
2.
Control the suspension
a.
Oil leakages
b.
General condition (scratches, damages…)
c.
Establish a potential quotation for repairing the suspension
d.
Check settings consistency
3.
Clean the suspension. There is multiple way to clean:
a.
Pressure washing
b.
Hot water + soap
c.
Oil bath + brush
d.
Alcohol spray
4.
Note the customer’s settings of the suspension. You could use page 11 of this manual to do so.
5.
Disassemble the suspension following the §6 – Step by Step
6.
Clean the sub-assemblies and control them when removing from the suspension
7.
Change parts, reassemble and control the suspension
8.
Apply back the suspension’s settings.
9.
Clean the suspension before packaging
10.
Complete traveler with all information and join it with the suspension
5.2
HOW TO USE THIS DOCUMENT?
Tool(s) required for the step
Additional Caution or
Information linked to the step
Localization of the step on
the suspension
Color code referring to
service type (see page 8)
Pictures describing the steps
Step number in the routine