09
EN
– no re-use – this medical aid is intended for treating one patient
– whilst wearing the protector, please neither use any creams nor ointments
on or around it as they can destroy the material
Fitting instructions
The BORT Generation hip protector can be worn above and below clothes.
1
Before putting it on, open the Velcro fastening at the front and guide the
belt, if possible using the hand straps, from the rear around the pelvis
with a slight tension.
2
Close the Velcro fastening and then check the correct positioning of the
protector cushions in the side area of the trochanter major.
3
To guarantee as simple as possible handling in everyday life, the BORT
Generation hip protector can be pulled upwards when closed and going
to the toilet and then back to the correct position when ready.
Removal
To remove the hip protector, open the Velcro fastener. Close the Velcro
fastener in order to avoid early wear to the Velcro surface.
Material composition
Polyamide (PA), elastane (EL)
The sewn in textile label provides the precise material composition.
