- 8 -
Holes
Must
Align
Saddle
STEP 6
SECTION LEVELING
Where required, level sections with shims to cause each upright assembly to
be plum within 1/10" inch per foot of height.
FAILURE TO LEVEL SECTIONS COULD RESULT IN
SHELVING COLLAPSE, PERSONAL INJURY
AND/OR COMMODITY LOSS.
MAJOR ACCESSORIES
SHELF SIDE SUPPORTS
Tabs hook into front and rear posts in the same manner as shelf clips. Side
flange of shelf rests on top flange of shelf side support.
SHELF REINFORCEMENT SADDLES
Install under center of shelf, flanged side up. Turn slightly to clear shelf side
flange and then rest on side flanges. Must be used in conjunction with shelf
side supports.
Shelf Side Support
STEP 7
TIGHTEN ALL BOLTS
Tighten all bolts and add the intermediate shelves to complete the sections.
LEDGE TYPE SHELVING
Ledge sections, 3'3" high, are bolted to the front of a full height section. The
bolts are fastened through the fourth hole from each end.
Bolt Through Fourth Hole
with 1/4-20 x 5/8 Hex Head
Cap Screw (Grade 5) and
Hex Nut
Ledge Section
Full Height Section
Shims
Front and/or Rear
