BOROSIL BSJU13WB01, Руководство пользователя

Страница: 4 / 8

BEFORE USING
REMARK:
. Assemble the feeder onto the separator bowl (Fig ).
• Do not operate this unit without any load
• Do not use with wet hands.
. Twist the feeder clockwise to align the slot on the feeder with the lock-unlock mark, and then
fix it till the feeder gets locked. (Fig ).
. Place Juicer bowl under the juice outlet and pulp collector bowl under the pulp outlet. Put
the power plug into the main socket and switch on the main supply. (Fig ).
• Before startup, take out all accessories, reinstall the machine before trial operation.
HOW TO ASSEMBLE:
• Read all instructions carefully and keep them for future reference.
• Dismantle package and place all parts on a flat table.
• Immerse all removable parts and accessories in warm water and dry them. To prevent electric
shock and machine damage, do not immerse the main machine in water.
• Before assembly, make sure the cord is not connected to a power source and the switch is
at "O" position.
• Use only the accessories recommended by the manufacturer.
• It is recommended to stand on a rubber mat/insulated surface or with wear rubber slippers
while using the appliance to avoid electric shock in case the product malfunctions.
• After every use, turn off the switch and before dismantling make sure the motor has stopped
rotating and, then pull out the plug.
. Assemble the pulp and juice separator onto the motor unit, the separator bowl must be fixed
to the same point as the motor unit (Fig. & ).
• Before use, assemble all parts as per drawing, otherwise the normal operation would be affected.
. Assemble the squeezer and the strainer into one part (Fig ).
. Place the squeezer unit inside the separator bowl and rotate until it falls into the right
place (Fig ).
. Insert the small pieces of fruits from the top and push them down with the help of the
pusher. (Fig ).
HOW TO USE