Bornack FALLSTOP FS BK, Руководство пользователя, Страница: 7 / 32

EN
Always check every time
before use!
• The personal protective equipment
(PPE) may no longer be used in the
case of even very minor faults.
• Faulty PPE components may only be
tested or repaired by BORNACK or in a
workshop authorised in writing by
BORNACK.
• Regular inspections are essential
because the safety of the user depends
on the efficiency and durability of the
PPE.
• The user must have completely read
and understood the User Manual
before use.
VISUAL INSPECTION
• Check that the rope protection is
complete.
• All seams are undamaged. There are
no visible signs of damage to the
textile components nor can faults be
felt with the hands.
• Housing and connectors acc. to EN 362
show no obvious signs of damage and
are not bent. Fasteners of the connec-
tors acc. to EN 362 and their locks are
functional.
• No knots in the safety rope. Exception:
if the rope end securing on a safety
rope needs to be a knot, this must be
in place.
• Red limit ball is on the safety rope and
cannot be moved.
• The last inspection by an expert was
carried out within the past 12 months.
FUNCTION TEST
• Hold the safety rope below the fall
arrester and pull the fall arrester on
the blue connecting band toward the
anchor point. The fall arrester must
slide easily over the safety rope.
• Hold the safety rope above the fall
arrester and pull the fall arrester on
the blue connecting band on the
safety rope toward the lower rope end
securing. The fall arrester must be
clamped tightly to the safety rope.
INFORMATION BEFORE USE