5
www.BormannTools.com
GB
Your 500 watt power inverter converts 12
-
volt vehicle battery power into 230 volts of AC power. You can use the
inverter in your vehicle to operate many types of appliances that use AC power such as TVs, VCRs, portable
computers, power tools and lights for emergency or camping use.
The inverter works with your vehicle
’
s engine turned on or off (accessory mode). It provides a continuous output
of up to 500 watts.
BASIC OPERATION
Use the right operating voltage for both input and output of the inverter.
Connecting RED terminal from inverter to + of battery terminal and connect BLACK terminal from inverter to
–
of battery terminal.
Insert
the
plug of your appliances into AC socket at
the
front of the inverter.
Turn ON the power switch that is located at the front of the inverter, and the green LED light will light as
indicator that the unit at work.
RECOMMENDATION
If the power inverter makes beeping sound, turn OFF the power
inverter and disconnect all appliances from
inverter and disconnect the inverter from the power supply. The beeping sound is simply the low battery
warning, which indicates that
the
voltage of the battery power supply is getting low. Please restart the
vehicle engine before operating the power inverter.
When you are
not using the inverter, turn the switch to OFF and disconnect the inverter from the power
supply.
Disconnect the inverter when starting the vehicle
’
s engine.
BATTERY USE
TO avoid over
-
discharging your vehicle
’
s battery, you should run your engine for 10
-
20 minutes to recharge the
vehicle
’
s battery after 2
-
3 hours of operating the inverter.
If you choose to connect the vehicle directly to your battery terminals, it is important to connect with right
polarity (C from inverter to + of battery terminal and connect
–
from inverter to
–
of battery
terminal)
CAUTION:
THE FOLLOWINGS OPERATION WILL DAMAGE THE UNIT:
REVERSE POLARITY BY CONNECTING THE WIRES TO THE INCORRECT TERMINALS.
CONNECTING THE BATTERY CHARGER TO REPLENISH BATTERY WITHOUT DISCONNECTING THE INVERTER
FIRST.
CONNECTING THE INVERTER TO POWER SOURCE GREATER THAN 15
-
VOLT DC.
