BorMann PRO BWC2000, Руководство пользователя, Страница: 7 / 12

7
www.BormannTools.com
Product Description : Our electric wall chaser , with a large motor power, high efficiency, powerful, cutting depth
adjustable, the use of light and other advantages, especially the original no dead angle cutting function is the country's
first patent .
1
User
:
1. One of the molding of old brick, cement brick, light brick and other materials.
2. Granite, marble and other stone in one of the forming grooves.
3. Cement floor, concrete wall in one of the forming grooves.
Technical parameters
Model BWC2000
Voltage - Frequency 220V-50Hz
Max Power 4200W
No - Load Speed 5700r/min
Disk Diameter 125mm
Max Cutting Depth 40mm
Max Cutting Width 50mm
Net Weight 6.2kg
Warning
：
Before using this tool, please read the instructions carefully and keep them properly for future
reference
！
General safety rules
Warning
！
Our company is not responsible for the electric shock, fire and/or serious injury caused by the use or
operation without the instructions listed below.The warning term "power tools" in all the following examples refers to
the city point drive (wired) power
tools or battery (wireless) power tools that are properly kept in order to be used .
a) Workplace
1) Keep the workplace clean and bright. Chaos and dark places can cause an accident.
2) Do not operate electric tools in explosive atmospheres, in the presence of flammable liquids, gases or
dust. The spark generated by the power tool ignites dust or gas.
3) Let the child and the spectator move the power tool after leaving. Distraction will make you relax control.
b) Electrical safety
1) The power tool plug must match the socket. Never change the plug in any way. The power tool to be
grounded can not use any conversion plug. Unmodified plugs and matching receptacles will reduce the risk
of electric shock.
2) Avoid contact with the ground surface, such as pipes, heat sinks and refrigerators. If your body is
grounded, increase the risk of electric shock.
3) Do not expose the power tool to rain or moisture. Water entering the power tool will increase the risk of
electric shock.
4) Do not abuse the wires. Never use wire handling, pull the power tool or pull out its plug. Keep the power
tool away from heat, oil, sharp edges or moving parts. Damaged or wound wires may increase the risk of
electric shock.