3
www.BormannTools.com
GB
Box Contents
1x10W Rechargeable LED Work light
1X USB Charging Cable
Operating Voltage:
AC100-240 V adaptor.
2X 3.7 V 2200maH (18650)
Charging:
1.
Connect the cable provide to the USB charging input on the back of the work light.
2.
Connect the USB plug to a USB mains power adaptor or a USB charging port on a computer.
3.
Charging will take between 5 and 10 hours depending on if you’re using a 5V 1A power supply or a computer USB
port which is only 500mA.
4.
When the product is charging the red light flashing, then it stops flashing the charge is over, you can now
disconnect the USB charging cable.
5.
The product can use 2pcs 18650 Li-ion batteries or 4pcs AA dry batteries.
Modes
Press the power/mode button to use each of modes on the work light.
High light – low light –flash-off.
Safety
1.
Place the LED work light in a well ventilated area and keep distance of at least 0.5m if placed near a wall.
2.
Do not open the equipment or touch any of its internal parts.
3.
Do not expose charging input socket or cable to water or any other liquids.
Technical Data
Led type:
10W COB LUMEN:700-800LM
Switch modes: 100% ON->50% ON->FLASH>OFF
Battery:
Lithium 4400MAH
Charging time: 5h
Light time:
3.5h
