24
www.BormannTools.com
Warning!
Ensure battery pack is connected correctly. Sliding the battery pack on incorrectly may cause
damage to the battery/charger.
When the battery pack is fully charged, the green LED (8.1) will light.
Warning!
If the indicator lights fail to illuminate during the charging cycle, unplug the charger from the
power supply socket outlet and replace the battery pack.
Completing the charging cycle:
-
Disconnect battery charger from the power supply.
Caution:
Do not pull the plug out of the power supply by pulling on the cord.
•
Make sure to grasp the plug when removing from power supply to avoid damaging the
cord.
-
Remove the battery pack from the battery charger.
•
Supporting the battery charger with hand, pull out the battery pack from the battery
charger.
•
Make sure to grasp the plug when removing from power supply to avoid damaging the
cord.
Cau
tion:
When the battery charger has been continuously used, the battery charger will be
hot. Once the charging has been completed, give 15 minutes rest until the next charge.
If the battery pack is charged when it is warm due to battery use or exposure to sunlight, the
battery pack will not be recharged. In such a case, let the battery pack cool before charge.
If the red indicator flickers rapidly at 0.2
-
second intervals, check for and take out any
foreign objects in the charger's battery slot. If there are no foreign objects, it is probable that
the battery pack or charger is malfunctioning. Allow battery/charger to normalise and try
again.
BATTERY PACK CHARGE STATUS
To display the amount of charge left in the battery pack press the
charge level indicat
or
button (5.2).
