EN
WWW.BORMANNTOOLS.COM
2
Mounting Instructions
a. Fix the two pieces of flexible hose (8) for water inlet onto the mixer body (1).
b. Fix the o-ring (3) onto the bottom ring of the base (2), and then screw the
screw pole (6) onto the mixer body (1).
c. Put the mixer body (1) onto the table.
d. Put the rubber washer (4) and iron washer (5) onto the screw pole (6), then
screw the nut (7) onto the screw pole (06) to fix the mixer body (1).
Assembling parts:
i. 1 x fixing part (1-7).
ii. 2 x fixing part (8).
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the prod-
ucts. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be included in
the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or
for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by tech-
nicians of the authorized service department of the manufacturer.
