BorMann BPW1500, Руководство пользователя

Страница: 20 / 22

www.BormannTools.com
•
Remove excess water from the pump by tipping the unit on both sides to drain any
remaining water from inlet and outlet fittings.
•
Remove Water Intake Filter and flush with water to remove dirt or debris. Return filter once
cleaned.
•
Drain detergent reservoir and flush with running water.
•
Wipe away any remaining water on all parts and fittings.
•
Engage the gun safety lock.
•
Store the pressure cleaner, parts, and accessories in an area with a temperature above 0
℃
(32
℉
).
Winterizing and Long-Term Storage
FOLLOW ALL OF THE ABOVE SHUT-DOWN PROCEDURES,
ADDING THE FOLLOWING STEPS….
•
After disconnecting the water supply, and before disconnecting the high-pressure hose, turn the
pressure cleaner on for 2-3 seconds , until any remaining water in the pump exits. TURN UNIT
OFF IMMEDIATELY.
CONTINUED USE OF THE PRESSURE CLEANER WITHOUT
WATER SUPPLY ATTACHED WILL CAUSE
SEVERE DAMAGE TO THE UNIT!
• Always store the pressure cleaner, parts, and accessories in an area with a temperature above
0° C (32° F).
WARNING: FAILURE TO COMPLY WITH THESE
STORAGE INSTRUCTIONS WILL RESULT IN
DAMAGE TO THE PUMP ASSEMBLY
.
Maintenance
• This pressure cleaner is supplied with a closed lubrication system, so no addition of oil is
needed.
•
Check all hoses and accessories for damage prior to use.
•
Check the inlet filter periodically for deposits. Clean this filter regularly for maximum
performance.
CLEANING TIPS
WARNING: ALWAYS TEST THE SPRAY IN AN AREA FREE AND CLEAR OF PEOPLE AND
OBJECTS BEFORE YOU SPRAYAT THE INTENDED CLEANING SURFACE.
Wood and Vinyl Decks