5
www.BormannTools.com
Error solution
While using the device, it may occur the prompt instruction as following:
model
BDM2500
Measurement accuracy
+/-3mm (Under unfavorable conditions, such as
strong light, weak surface reflection and large
temperature difference, the error of
measurement is+/-0.25mm/m beyond 10 meters.
Measuring unit
M/in/ft
Measuring range(baffle board not included)
0,05-20m( Please use chopping boards when
sunlight or target reflection is not good)
Measuring time
0.1-3seconds
Laser grade
Grade
Ⅱ
Laser type
620-670nm< 1mw
Water-Proof and dust-proof grade
IP 56
Laser auto shut-down
15 seconds
Auto shut-down
45 seconds
Illumination
White LED
Button’s service life
One million times
Type and service life of battery
AAA alkaline battery(1.5Vfortwo),Max 15000
times
Product size:
100*35*23mm
Weight
70g
Working temperature range
0
℃
-40
℃
Storage temperature range
-25
℃
-60
℃
Technical
parameters
*There shall be quite big error in measurement accuracy with +3MM+40PPM under the poor
measuring conditions (such as too stronger environmental light too higher or lower temperature
reflection conditions on the measured points.)
*Under the circumstances with strong sunlight or bad reflection of the object, please use the baffle
board accordingly.
Maintenance
It’s completely forbidden to drop the device into water, the wet soft cloth can be used to wipe off the
dusts on the surface, but without the erosive solution for washing. To wipe the optical parts surface
according to the method of wiping the camera lens (including the laser exit window and the lens for
signal reception.)
Appearance
Reason
Solution
No new data
Too lower battery voltage
To replace the new battery
No new data
Measuring distance exceeds
Instrument range
It can be divided into sections
by means of shielding
No new data
Too Weaker signal strength
To measure the target Point
with stronger reflective ability.
No new data
Too stronger signal strength
To measure the target point
with weaker reflective ability.
No new data
H.F Hardware
Error To start/shut down the
device again in case of
starting/shutting down device
failed to solve such problem,
please contact your local
dealer.
